Sony DVP-NS305 Operating Instructions Manual page 24

Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder
function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects
of this player.
[Speakers]
Rear (L)
Rear (R)
l : Signal flow
Note
After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "ON" in Quick Setup
(page 25). If your AV amplifier (receiver) has an
MPEG audio decoder function, set "MPEG" to
"MPEG" (page 63). Otherwise, no sound or a loud
noise will come from the speakers.
24
CD/DVD player
DIGITAL OUT LINE OUT COMPONENT
Y
VIDEO OUT
PCM/DTS/MPEG/
S VIDEO
DOLBY DIGITAL
OUT
COAXIAL OPTICAL C B
R-AUDIO-L VIDEO
C R
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to optical digital input
AV amplifier (receiver) having
a decoder
Subwoofer
D
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
to coaxial digital input
[Speakers]
Centre
Front (L)
Front (R)