Hookups; Hooking Up The Player; Step 1: Unpacking; Step 2: Inserting Batteries Into The Remote - Sony DVP-NS75H Operating Instructions Manual

Hooking Up the Player
Follow steps 1 to 6 to hook np and ac_iust the settings of the player.
• Plug cords securely to prevent tmwanted noise.
• Refer to the instructions supplied with the components to be connected
• You catmot connect this player to a TV that does not have a video input jack.
• Be sme to discmmect the power cord of each component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/Video cord (phono plug × 3 _ phono plug × 3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Step 2: Inserting Batteries Into the Remote
Yon can control the player using the snpplied remote. Insert two Size AA (R6) batteries by
matching the _) and G ends on the batteries to the markings inside the compartment. When
nsing the remote, point it at the remote sensor m on the player.
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any tbreign object into the remote casing, particularly when replacing the batteries
• Do not expose the remote sensor to direct light from the sire or a lighting apparatus Doing so may cause a
malfimcfion
• If you do not use the remote for an exWnded period of time, remove the ba_,teries to avoid possible damage
from battery leakage and corrosion.
16