Read Zeroshiftvalue - Siemens SIMATIC S5 Equipment Manual

General Function Description
1.12.3 Depending on Direction
This function allows you to inhibit the interrupts for channel 1 and/or channel 2, depending on the
direction.
Inhibit Direction
Channel
1 Backward
Forward
1 Backward and forward
2 Backward
Forward
2
2 Backward and forware
1.13 Read Zero Shift Value
This special function can be used to read the values of the zero shift.
Channel
1
2
The function is executed once with transfer of E8/E9.
The zero shift values are indicated in the bytes of module address +4, +5 and +6.
1) This function is implemented as of firmware release R09. The standard function blocks sup-
port the special function starting with the release states given in the technical specifications
1 – 24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Entry in Byte (Module Address +n)
xl
x2
x3
lx
2x
3x
Entry in Byte (Module Address +n)
R 02/92
F8
F8
F8
F8
F8
E8
E9