Operating; Local Operation (Hmi) - Siemens SITRANS FC330 Operating Instructions Manual

Operating

7.1

Local operation (HMI)

Operation via HMI
The device is operated with the capacitive proximity keypad on the HMI.
The text display above the operating elements gives a menu-guided operation of the individual
device functions and parameters. Successful operation of the key is indicated by a small green
LED next to the display.
①
②
③
Figure 7-1
Note
Calibration of the keypad
When the lid is mounted, all keys are calibrated (approximately 40 seconds). During calibration
the LED is on and the keys cannot be operated.
If one of the keys is pressed for more than 10 seconds, this key is calibrated (duration less than
10 seconds). Release the key for further operation.
Note
HMI timeout
If no key is pressed for 10 minutes, the display switches to show operation view.
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
Full graphical display
LED (for indication of key operation)
Capacitive proximity keypad
Local user interface
7
103