Sony IPELA SNC-RX550N User Manual page 77

(stop)
Click to stop recording or playback.
When you click it during recording, recording stops, and
you can review the recorded sound or upload the
recording to the camera.
When you click it during playback, playback stops and
the progress bar display returns to the start position.
(recording)
Click to start recording of the sound input to the
computer microphone. The maximum recording time is
30 seconds.
The codec specified in the Setting tab is used for the
recording.
Note
You cannot upload an audio file to the camera during
recording.
(file open)
Click to select a previously saved audio file. You can
play the selected audio file or upload it to the camera.
(save)
Click to save the recorded audio file to the computer.
(upload)
Click to upload the recorded or selected audio file to the
camera specified in the Setting tab. Only one audio file
can be uploaded to the camera.
Uploading the recorded audio file to the
camera
Tip
Before operating, create an audio file and set the camera
for audio uploading. Set the camera using the Setting
tab.
1
Click (recording) to start recording.
2
Click (stop) to stop recording.
Recording will stop automatically in 30 seconds.
3
Click (upload) to transmit the audio file to the
camera.
Saving the recorded audio file to the
computer
1
Click (recording) to start recording.
2
Click (stop) to stop recording.
Recording will stop automatically in 30 seconds.
3
Click (save).
The Save as dialog appears. Type the file name and
save it.
Uploading the saved audio file to the
camera
1
Click (file open) and select the audio file to be
uploaded.
2
Click (upload) to transmit the audio file to the
camera.
Setting tab
Use this menu to set the camera for audio uploading.
User
Set the User ID and Password for the administrator.
The factory setting of the User ID for the Administrator
is "admin," and the Password is "admin."
Camera address
Type the IP address or host name of the camera you want
to transmit audio to.
Camera port
Set the port of the camera you want to transmit audio to.
The default port is "HTTP" (80).
Using the SNC audio upload tool — Transmitting Audio to Camera
77