Preparing Connection To The Camera; Creating And Transmitting A Panorama Image; Saving A Custom Image To The Camera - Sony IPELA SNC-RX550N User Manual

File open
Allows use of a Bitmap or JPEG image file in spite of a
panorama image.
Note
The size of the image in the file should be 320 × 90
pixels (horizontal/vertical). Other image sizes are not
supported.
Send
Transmits a panorama image converted into a JPEG file
to the camera.
Setting tab
Administrator name: Type the ID of the administrator
of the camera.
Administrator password: Type the password of the
administrator of the camera.
Camera address: Type the IP address or host name of
the camera.
Camera port No.: Type the port number of the camera.
Proxy setting
Use proxy: Check this item when you use a proxy
server.
Proxy server name: Type the IP address or host name
of the proxy server.
Proxy server port No.: Type the port number of the
proxy server.
Preparing connection to the
camera
Before creating a panorama image, set the following
items in the Setting tab to allow connection to the
camera.
Administrator name: Type the ID of the administrator
of the camera to be connected.
Administrator password: Type the password of the
administrator of the camera to be connected.
Tip
The factory settings of both items are "admin."
Camera address: Type the IP address or host name of
the camera to be connected.
Camera port No.: Type the port number of the camera
to be connected.
When you use a proxy server for camera connection,
check the Use proxy check box and set the following
items.
Proxy server address: Type the IP address or host name
of the proxy server.
Proxy server port No.: Type the port number of the
proxy server.
Preparations for connecting to the camera are now
completed.
Creating and transmitting a
panorama image
1
Click Make on the Main tab to start shooting.
A panorama image will be created in about two
minutes.
Note
Do not perform settings of the camera or move the
camera during shooting.
2
Select the view angle for a panorama image on
Angle Setting.
To limit the pan/tilt range of the camera to the
selected view angle, check the Lock check box.
3
Click Send to transmit the panorama image to the
camera.
The panorama image is saved in the camera.
You can use the saved panorama image when you
control panning and tilting from the main viewer.
Saving a custom image to the
camera
You can save a custom image to the camera in spite of
the panorama image shot by the camera.
Prepare the image to conform to the following
requirements:
• File format: JPEG or Bitmap
• Image size: 320 × 90 pixels (horizontal/vertical)
Using the SNC panorama creator — Creating a Panorama Image
81