Having Images Printed At A Shop; Marking Print Marks; Marking Print Marks In Single-Image Mode - Sony DSC-V3 Fall 2005 Operating Instructions Manual

Having images
printed at a shop
Note the following items when
having images printed at a
shop.
• Contact the print service shop to
determine what recording medium types
are supported.
• When using a print service shop that
does not support "Memory Stick" or CF
card, copy the images to a CD-R, etc.,
and bring that to the shop instead.
• Be sure to make a backup copy of the
data before using a print service shop.

Marking print marks

Marking images you want to have printed
beforehand with print marks is convenient
when having images printed at a print
service shop.
MENU
Control button
• You cannot mark movies or images recorded in
RAW mode.
• When you mark images shot in Multi Burst
mode, all the images are printed on one sheet
divided into 16 panels.
• If you mark an image shot in TIFF mode with
a print (DPOF) mark, only the uncompressed
(TIFF) image is printed, and the JPEG image
recorded at the same time is not printed.
• You cannot set the number of prints.
Marking print marks in
single-image mode
 Set the mode dial to
 Display the image you want to
mark with /.
Mode dial
 Press MENU.
The menu appears.
 Select
then press .
The
displayed image.
60min
DPOF
Exit
BACK/NEXT
 To continue and mark other
images, display the desired
image with /, then press .
To unmark the
Press  again in step  or . The
mark disappears.
.
(DPOF) with /,
mark is marked on the
1M
2/9
101
mark
95