Setting The Date And Time - Sony DSC-M1 Fall 2005 Operating Instructions Manual

Setting the date and time

1
, Open the LCD panel to turn on
the power.
The recording mode lamp (green) lights up
and the Clock Set screen appears on the
LCD screen.
• To change the date and time, on
the Setup screen, select [Clock
Set] in (Setup 2) (pages 54 and
2
117), and perform the procedure
from step 2.
Clock Set
2004 / 1 / 1 12 : 00
2
, Select the desired date display
format with v/V on the control
button, then press z.
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable battery (page 119), which
provides the power for saving the time data,
ever becomes low, the Clock Set screen will
appear again. When this happens, reset the date
and time, by starting from step 2 above.
Y/M/D
M/D/Y
D/M/Y
OK
AM
Cancel
3
, Select the year, month, day,
hour or minute item you want
to set with b/B on the control
button.
The item to be set is indicated with v/V.
Clock Set
Y/M/D
M/D/Y
D/M/Y
2004 / 1 / 1 12 : 00
OK
AM
Cancel
21