Rotating The Lcd Screen - Mirror Mode; Selecting A Flash Mode - Sony DSC-M1 Fall 2005 Operating Instructions Manual

To cancel the self-timer in the middle
of the operation
Press V (
) on the control button again.
The indicator disappears from the LCD
screen.
To stop shooting a movie
Press MOVIE again.
• If you press PHOTO while standing in front of
the camera, the focus and the exposure may not
be correctly set.
Rotating the LCD screen
– Mirror mode
MOVIE
PHOTO
When shooting in mirror mode, turn over
the LCD screen to the lens side. The image
on the LCD screen is a mirror-image.
However, the image can be normal when
recorded.
You can start recording using the buttons on
the side of the LCD screen.
Image on the Recorded image
LCD screen
• You cannot press and hold PHOTO on the side
of the LCD screen halfway down.

Selecting a flash mode

60 min 101
640 30f
VGA
[ 96 ] [00:10:48]
, Press v ( ) on the control
button repeatedly to select a
flash mode.
Each time you press v ( ), the indicator
changes as follows.
No indicator (Auto): The flash
automatically strobes when shooting
images in a dark place. The factory setting
is Auto.
(Forced flash): The flash strobes
regardless of the surrounding brightness.
(Slow synchro): The flash strobes
SL
regardless of the surrounding brightness.
The shutter speed is slow in a dark place, so
you can clearly shoot the background that is
out of flash light.
(No flash): The flash does not strobe.
39