Connecting The Camera To The Printer; Printing In Single-Image Mode - Sony DSC-M1 Fall 2005 Operating Instructions Manual

Connecting the camera to
the printer
Connect the camera to the Cyber-shot
Station. Then, connect the
of the Cyber-shot Station and the USB jack
on the printer with the USB cable
(supplied). Turn on the camera and printer.
The camera turns to PLAY mode regardless
of the current mode, and an image in the
selected playback folder and the print menu
appear on the LCD screen.
After the connection
is made, the
indicator appears on
the LCD screen.
101 2/9
1M
Print
All In This Folder
DPOF image
Select
This image
Cancel
Printer
When [USB Connect] is not set
to [PictBridge] on the Setup
screen
Even if you turn on the camera, you cannot
(USB) jack
use the PictBridge function. Disconnect the
USB cable from the Cyber-shot Station and
set [USB Connect] to [PictBridge].
(page 80)
Printing in single-image
mode
When you connect the camera and a printer,
the print menu appears.
MODE
MENU
Control button
a Select the desired printing
type with v/V, then press z.
2/9
101
1M
Print
All In This Folder
DPOF image
Select
This image
Cancel
All In This Folder
Prints all the images in the folder.
DPOF image
Prints all the images with the
mark (page 84) regardless of the
displayed image.
81