To Remove The Battery Pack - Sony DSC-M1 Fall 2005 Operating Instructions Manual

To charge the battery pack
only using the AC Adaptor
You can charge the battery pack without the
Cyber-shot Station, such as during your
travels. Connect the DC plug of the AC
Adaptor to the camera with the apex of the
v mark on the camera and the apex of the v
mark on the DC plug facing.
Multi connector
1
DC plug
AC Adaptor
Power cord
(mains lead)
• Be sure to turn off your camera when
charging the battery pack (page 19).
• When placing the camera, make sure the LCD
screen is facing up.
• After charging the battery pack, disconnect the
AC Adaptor both from the multi connector of
the camera and from a wall outlet (wall socket).
16
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or
viewing time.
Remaining indicator
• In standby mode, the battery remaining time for
still image shooting is indicated.
• The displayed time remaining may not be
To wall outlet
correct under certain circumstances or
(wall socket)
conditions.
2
3
Charging time
Approximate time to charge a completely
discharged battery pack using the AC
Adaptor at a temperature of 25°C (77°F).
Battery pack
NP-FT1 (supplied)
• The charging time may become longer under
certain circumstances or conditions.
60min
Remaining time
Charging time
(min.)
Approx. 150

To remove the battery pack

Battery eject lever
Open the battery cover. Slide the battery
eject lever in the direction of the arrow, and
remove the battery pack.
• Be careful not to drop the battery pack when
removing it.