Memory Stick Duo - Sony DSC-M1 Fall 2005 Operating Instructions Manual

Symptom
You cannot print an image.
Images once copied to a computer
cannot be viewed on the camera.

"Memory Stick Duo"

Symptom
You cannot insert a "Memory Stick
Duo".
You cannot record on a "Memory Stick
Duo".
You cannot format a "Memory Stick
Duo".
You have formatted a "Memory Stick
Duo" by mistake.
PictBridge compliant printer
Symptom
The connection cannot be
established.
Cause/Solution
• Check the printer settings.
• Copied to a wrong folder. Copy them to an available folders, such as "101MSDCF" (page 92).
• The folder/file name has been changed on your computer (page 94).
Cause/Solution
• You are inserting the "Memory Stick Duo" backwards. Insert the "Memory Stick Duo" from the
correct side (page 23).
• You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to the
LOCK position. Set the switch to the recording position (page 119).
• The capacity of the "Memory Stick Duo" is full. Delete unnecessary images (page 49).
• You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to the
LOCK position. Set the switch to the recording position (page 119).
• All the data on the "Memory Stick Duo" are deleted by formatting. You cannot restore them. If you
are using the "Memory Stick Duo" with write-protect switch, we recommend that you set the switch
to the LOCK position to prevent accidental erasure (page 119).
Cause/Solution
• Consult with the printer manufacturer whether the printer is compliant with the PictBridge or not.
• Check that the printer is turned on and can connect with the camera.
• Set [USB Connect] to [PictBridge] on the Setup screen (page 117).
• Depending on the circumstances, the connection may not be established. Disconnect and connect the
USB cable again. If an error message is indicated on the printer, refer to the operating instructions
supplied with the printer.
107