Self-Diagnosis Display - Sony DSC-M1 Fall 2005 Operating Instructions Manual

Self-diagnosis display

– If a code starting with an alphabet
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
C:32:ss
Self-diagnosis display
112
Code Cause
C:32: ss There is trouble with your
camera's hardware.
C:13: ss
The camera cannot read or write
data on the "Memory Stick Duo."
An unformatted "Memory Stick
Duo" is inserted.
The inserted "Memory Stick
Duo" cannot be used with your
camera, or the data is damaged.
E:61: ss
A camera malfunction that you
E:91: ss cannot reverse has occurred.
If you are unable to solve the problem even after trying the corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.
Countermeasure
• Turn the power off and on again
(page 19).
• Re-insert the "Memory Stick Duo"
several times.
• Format the "Memory Stick Duo"
(page 51).
• Insert a new "Memory Stick Duo"
(page 23).
• Press the RESET button (page 101), then
turn the power on again.