Sony DFR-E3000 Operation Manual page 20

Software Operation
18(E)
Audio Input Interface box
Specifies audio signal to be recorded. Select AES/EBU, SDIF-2, or
Analog in accordance with the format of the digital audio signal input to
the DFR-E3000.
Reference Level box
Selects the reference level of the audio signal to be recorded.
Select the appropriate reference level in the Reference Level box.
Sampling Frequency box
When AES/EBU or SDIF-2 is selected in the Audio Input Interface box,
sampling frequency can be selected among 44.056 kHz, 44.1 kHz, and 48
kHz. Since the SDDS format uses sampling frequency of 44.1 kHz, the
internal sampling rate converter converts the input signal when 44.056 kHz
or 48 kHz has been selected.
Player Speed Adj. box
When AES/EBU or SDIF-2 is selected in the Audio Input Interface box,
adjust the sampling frequency using this item. For details, contact your
nearest Sony dealer or service personnel.
Ref. Lock box
"Lock" appears when the whole system is operating in sync.
Reference box
Specifies the sync signal to use and selects the format of the signal output
to the VIDEO SYNC OUT connector.
Selected sync signal Signal input from the
REFERENCE connector
Ext. NTSC NTSC
Ext. MONO MONO
Ext. PAL PAL
Int. NTSC
Int. MONO
Int. PAL
Frequency of vertical sync signal in each video system is as follows:
Video system
NTSC
MONO
PAL
Additional Pattern box
Displays the additional pattern to the visual character of the Header/Footer
setting. For details on creation and use of additional patterns, contact your
nearest Sony dealer or service personnel.
Signal output to the
VIDEO SYNC OUT
connector
NTSC
MONO
PAL
— NTSC
— MONO
— PAL
Frequency of vertical sync signal
59.94 Hz
60 Hz
50 Hz