Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Preparation For Disassembly; Keyboard/Top Cover - HP Stream 11 Maintenance And Service Manual

5 Removal and replacement procedures for
authorized service provider parts
IMPORTANT:
provider. Accessing these parts can damage the computer or void the warranty.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.

Component replacement procedures

There are as many as 50 screws that must be removed, replaced, and/or loosened when servicing the
computer. Make special note of each screw size and location during removal and replacement.

Preparation for disassembly

See Removal and replacement procedures preliminary requirements on page 17
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer

Keyboard/top cover

In this section, the first table provides the main spare part number for the keyboards. The second table
provides the country codes.
Table 5-1 Keyboard/top cover and Rubber Foot Kit descriptions and part numbers
Description
Keyboard/top cover
● For use in royal blue models
● For use in diamond white models
For use in rose pink models
●
Rubber Foot Kit
For use in royal blue models
●
For use in diamond white models
●
For use in rose pink models
●
22 Chapter 5 Removal and replacement procedures for authorized service provider parts
Components described in this chapter should only be accessed by an authorized service
for initial safety procedures.
Spare part number
L44441-xx1
L44642-xx1
L45168-xx1
L44455-001
L44456-001
L44457-001