6.
Starting near display, flex the chassis to loosen the top cover (1).
7.
Work around the edges to the bottom of the top cover (2), and then lift the bottom of the keyboard/top
cover until it separates from the bottom cover (3).
TIP:
accidentally pull the cables out of the connectors when removing the keyboard/top cover.
8.
While holding the front keyboard/top cover up, disconnect the keyboard cable from the reverse ZIF
connector on the system board (1).
9.
Disconnect the power button board cable from the ZIF connector on the system board (2).
24
Chapter 5 Removal and replacement procedures for authorized service provider parts
Cables connect from the bottom of the keyboard/top cover to the system board. Be sure not to