a.
Disconnect the display panel cable (1) from the camera/microphone module.
b.
Release the display panel cable from the retention clips (2) and routing channel built into the left
and top sides of the display back cover.
c.
Remove the display panel cable (3).
The display panel cable is available as spare part number L44466-001.
14.
If it is necessary to replace the WLAN antennas and cables:
a.
Detach the WLAN antennas (1) from the display back cover. (The antennas are attached to the
display back cover with double-sided adhesive.)
b.
Release the cables from the clips and routing channel built into the bottom, left, and right edges of
the display back cover (2).
Component replacement procedures
43