Keyboard Hook - HP Stream 11 Maintenance And Service Manual

Keyboard hook

Table 5-5 Keyboard hook description and part number
Description
Keyboard hook
Before removing the keyboard hook, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
Remove the keyboard hook:
1. Position the keyboard/top cover upside down with the front toward you.
2. Remove the Phillips M2.0 × 2.5 screw (1) that secures the keyboard hook to the top cover.
3. Remove the keyboard hook from the top cover (2).
Reverse this procedure to install the keyboard hook.
(Preparation for disassembly on page
Keyboard/top cover on page
Spare part number
L48424-001
22).
22).
Component replacement procedures 29