Finding Feature Information; Restrictions For Dynamic Arp Inspection - Cisco Catalyst 2960-XR Security Configuration Manual
Ios release 15.0 2 ex1
Hide thumbs
Also See for Catalyst 2960-XR:
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring Dynamic ARP Inspection
•
•
•
•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Restrictions for Dynamic ARP Inspection
This section lists the restrictions and guidelines for configuring Dynamic ARP Inspection on the switch.
• Dynamic ARP inspection is an ingress security feature; it does not perform any egress checking.
OL-29434-01
Finding Feature Information, page 195
Restrictions for Dynamic ARP Inspection, page 195
Understanding Dynamic ARP Inspection, page 197
Default Dynamic ARP Inspection Configuration, page 200
Restrictions for Dynamic ARP Inspection, page 201
Relative Priority of ARP ACLs and DHCP Snooping Entries, page 202
Configuring ARP ACLs for Non-DHCP Environments , page 202
Configuring Dynamic ARP Inspection in DHCP Environments, page 205
How to Limit the Rate of Incoming ARP Packets, page 207
How to Perform Validation Checks, page 209
Monitoring DAI, page 210
Verifying the DAI Configuration, page 211
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
14
C H A P T E R
195
Advertisement
Table of Contents
