Cisco Catalyst 2960-XR Security Configuration Manual page 290

Configuring 802.1x Accounting
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. aaa accounting dot1x default start-stop group radius
4. aaa accounting system default start-stop group radius
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/3
Step 3 aaa accounting dot1x default start-stop group radius
Example:
Switch(config-if)# aaa accounting dot1x default
start-stop group radius
Step 4
aaa accounting system default start-stop group radius
Example:
Switch(config-if)# aaa accounting system default
start-stop group radius
Step 5
end
Example:
Switch(config-if)# end
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
268
Configuring IEEE 802.1x Port-Based Authentication
Purpose
Enters global configuration mode.
Specifies the port to be configured, and enter interface
configuration mode.
Enables 802.1x accounting using the list of all
RADIUS servers.
(Optional) Enables system accounting (using the list
of all RADIUS servers) and generates system
accounting reload event messages when the switch
reloads.
Returns to privileged EXEc mode.
OL-29434-01