Overview - Cisco Nexus 9348GC-FX3PH Hardware Installation Manual

Overview

•
Overview
The Cisco Nexus 9348GC-FX3PH switch (N9K-C9348GC-FX3PH) is a 1-RU fixed-port, L2/L3 switch,
designed for deployment in data centers. This switch has 40 10M/100M/1G copper RJ45 downlink ports that
support PoE/PoE+/PoE++ and 8 10M/100M copper RJ45 downlink ports that support PoE/PoE+/PoE++, 4
10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports.
Note
This switch includes the following user-replaceable components:
• Fan modules (three) with the following airflow choices:
Note
Note
Overview, on page 1
Ports 41-48 support 10M/100M half-duplex only.
• Port-side intake airflow with burgundy coloring (NXA-SFAN-30CFM-PI)
• Port-side exhaust airflow with blue coloring (NXA-SFAN-30CFM-PE)
Table 1: Fan Speeds for this Switch
Typical/Minimum
Maximum
Each fan module has two rotors. The switch can function normally if one rotor
inside the any one fan module fails. In case of more than one rotor failure, the
switch will issue a warning and power down in 2 minute.
Cisco Nexus 9348GC-FX3PH NX-OS Mode Switch Hardware Installation Guide
C H A P T E R
Port-Side Intake Port-Side Exhaust
Fan Speed %
40%
100%
1
Fan Speed %
40%
100%
1