Process Data; Channel Diagnosis - Siemens TX-I/O User Manual

26 / 94
Siemens
Building Technologies
It is expressly not intended for use in combination with the status of the process
value.
4.1.4

Process Data

For process data mapping of binary input functions to channel process data, refer
to the corresponding sections in Chapter 4, "Process Data Channel Mapping" of
the TX-I/O modules.
4.1.5

Channel Diagnosis

Alarm type Cause / solution
Invalid Check the module configuration and parameterization
TX-I/O PROFINET BIM V1.0
Parameters
CM110564en_02
23.09.2010