Operating The Camera; Administrator And User - Sony SNC-CH110 User Manual

Operating the Camera

This section explains how to monitor the image from the
camera using your Web browser (Internet Explorer).
The functions of the camera should be set by the
Administrator. For the setting of the camera, see
"Administrating the Camera" on page 23.
Each type of user can use the corresponding functions below.
Function
Monitor a live image
View the date and time
Control the frame rate (JPEG mode only)
Control the image view size
Save a still image and movie in the computer
Send an image file to the FTP server
Send an image attached to an e-mail
Switch the Day/Night function mode
Switch the TCP/UDP transmission mode (Available in
MPEG4/H.264 mode only)
Call the preset position
Perform the pan/tilt/zoom operation
Select the codec mode
Control the setting menu
Usable function
z
– Not usable function
The access rights of the administrator and the user can
be set in "Setting the User — User Menu" of the
Administrator menu on page 52.

Administrator and User

This network camera identifies those who log in as the
Administrator or User.
The Administrator can use all the functions of this
network camera, including camera settings. The User
can use the functions for monitoring the image from the
camera, and control the camera. The Viewer mode
setting is used to restrict the user's access rights. There
are five types of users.
Administrator
Full
z z
z z
z z
z z
z z
z z
z z
z z
z z
z z
z z
z z
z –
User
Pan/Tilt Preset Light
position
z z z
z z z
– – –
z z z
z z z
– – –
– – –
– – –
– – –
z z –
z – –
z z z
– – –
Administrator and User
View
z
z
–
–
–
–
–
–
–
–
–
–
–
11