Siemens SIMOTION Function Manual page 117

3. Execute the batch file.
4. Copy the following from the directory of the card images (e.g. D:\modular_machine
Basic Functions for Modular Machines
Function Manual, 04/2014
The card images are created in the \INSTALL\SIMOTION\VEyyyyyy subdirectory of the
directory specified for the card images (e.g. D:\modular_machine\cardfiles):
– The PROJECT subdirectory contains the card images of the configurations in the form
PRxxxxxx.ZIP, where xxxxxx is the hexadecimal number which was defined in the
DExxxxxx identifier when the compressed files were created, see Creating the
compressed configuration files (Page 114).
– The INITIAL subdirectory contains the card image of the initial configuration
INITIAL.ZIP.
– The PACKAGE subdirectory contains the card image of the technology packages.
– The KERNEL subdirectory contains the card image of the SIMOTION Kernel
KERNEL.ZIP.
A BOOT.INI file is also created in the specified directory (e.g. D:\modular_machine
\cardfiles).
Note
Existing card images will be deleted and overwritten
The command line application u7mkcnfx.exe deletes all existing data in the \INSTALL
\SIMOTION subdirectory of the directory specified for the card images (e.g. D:
\modular_machine\cardfiles) with the /m"MAKE_STORE" option.
If you want to create the card images for several kernel versions, proceed as follows:
1. Create the card images for the first kernel version as described above.
2. Copy the VEyyyyyy directory from the \INSTALL\SIMOTION subdirectory to an
arbitrary directory outside this directory structure (e.g. D:\temp).
You can use the following command line, for example, in the batch file:
xcopy /e /f d:\modular_machine\cardfiles\INSTALL\SIMOTION d:
\temp
3. Create the card images for a further kernel version as described above.
4. Repeat steps 2 to 3 for each additional kernel.
5. Copy the VEyyyyyy directories from the temporary directory back to the \INSTALL
\SIMOTION subdirectory.
You can use the following command line, for example, in the batch file:
xcopy /e /f d:\temp d:\modular_machine\cardfiles\INSTALL
\SIMOTION
\cardfiles) to the memory card's root directory:
– The INSTALL directory with all subdirectories and files
– The BOOT.INI file
Overwrite any files and directories that exist.
Changing the active configuration or the active kernel
6.6 Procedure for creating the card images of configurations
117