Siemens SIMOTION Function Manual page 110

Changing the active configuration or the active kernel
6.6 Procedure for creating the card images of configurations
Figure 6-5
Note
The steps described in this chapter can also be automated by means of SCOUT scripting. A
corresponding script is shown in the appendix under "Creating the work directories on the
PC/PG" (Page 122).
Directory structure for several kernel versions with the respective associated configurations
If you want to create the card images for several kernel versions with their respective
associated configurations, proceed as follows:
1. Create the work directories (e.g. download, zip, cardfiles) as described above.
2. Create the new directories corresponding to the number of kernel versions and assign them
3. Copy or move the download and zip directories to the directories that you have just
4. In the cardfiles\INSTALL\SIMOTION directory, copy the VEyyyyyy directory (e.g.
The following figure shows the resulting directory structure:
110
Directory structure for one kernel with three configurations
unique names (e.g. VE004153 and VE004156).
created (e.g. VE004153 and VE004156).
VE004156) corresponding to the number of kernel versions. Assign unique names to the
copies in the form of VEyyyyyy, where yyyyyy is a hexadecimal number
(e.g. VE004153).
Basic Functions for Modular Machines
Function Manual, 04/2014