IBM RT PC Options Installation page 91

c. Pull the faceplate off the two bolts holding it in place.
Remove the
Face Plate.
3. Remove the cooling fan assembly. See "Cooling Fan Removal" on
page 2-6.
4. Turn the diskette drive upside down and locate the terminating resistor.
Warning: Do not bend the pins!
5. Insert a small, flat-bladed screwdriver under the resistor and lift.
2-50 Options Installation
Alternate ends of the resistor to lift evenly.
CJ
ClO
Cl
• 0
@
~
0
DO
Terminator
Resistor