Position E - IBM RT PC Options Installation

TNL SN20-9864 (May 1987) to 75X0217
Installing a Fixed-Disk Drive in Position E
Warning: Handle the fixed-disk drive carefully. Dropping, shaking, or
rough handling can damage both the drive and any stored data and can
cancel the warranty.
Refer to the system unit diagram for a picture of drive position E.
Refer to "Handling Static-Sensitive Drives" on page
2-4
before beginning
this section.
Warning: Follow
all
instructions under "Removing the Covers From the
System Units" on page
1-4
before you install the fixed-disk drive in drive
position E.
Use the following steps to install the fixed-disk drive in position E:
1. Remove the cooling fan assembly. See "Cooling Fan Removal" on
page
2-6.
CONTINUE
Section 2. Removing and Installing Drives in IBM 6150 2-29