IBM RT PC Options Installation page 9

How to Use This Book
viii
Options Installation
Read Section 1, "Getting Started" for instructions on removing the covers
from the system units. Read this section when installing options in a new
system or when adding options to a system already in use.
Both system units are shown in many drawings. Select the appropriate
drawing for reference.
To protect yourself and the equipment, do the steps in order and carefully
read and follow the instructions under the Warning and Caution notices.
Section 2, "Removing and Installing Drives in the IBM 6150 System
Units" gives instructions for installing the optional fixed-disk and diskette
drives.
The instructions in Section 3, "Installing the Adapters" provide general
information for installing the optional adapters and the system unit covers.
Section 4, "Processor Options" through Section 8, "Additional Options"
contain the information needed to install the different optional adapters.
A Reader's Comment Form and Book Evaluation Form are provided at the
back of this book. Use the Reader's Comment Form at any time to give
mM information that may improve the book. After you become familiar
with the book, use the Book Evaluation Form to give IBM specific feedback
about the book.