IBM RT PC Options Installation page 80

Removing Fixed-Disk in Position C
Follow these instructions to remove the fixed-disk drive installed in drive
position C:
1. Remove the screw holding the drive adapter in adapter slot 1. Slide the
adapter out of the slot.
2. Disconnect the 34-pin connectors C-AB and C-CD and the 20-pin
connectors C-C 1 and if connected, C-D 1.
To Fixed-Disk Drives
In Positions C and 0
To Diskette Drives
In Positions A and B
To Drive Adapter
~
__
~IO'
In Slot 1
~
Section 2.
..
~C-D1
A
C-C1
C-CD
C-AB
Removing and Installing Drives in IBM 6150
2-39