IBM RT PC Options Installation page 63

Hide thumbs Also See for RT PC:
Table of Contents

Advertisement

TNL SN20-9864 (May 1987) to 75X0217
9. Connect P 14 on the power cable to the 4-pin connector on the rear
of the fixed-disk drive in position D. Connect the ground wire from
the power cable to the ground tab on the drive.
Connector
(4-Pin)
10. Remove the screw holding the drive adapter in adapter slot 1. Slide
the adapter out of the slot.
2-26 Options Installation

Advertisement

Table of Contents
loading

Table of Contents