How To Put It Together - Bissell Big Green Ultra 16753 User Manual

This User's Guide has been designed to help
you get the utmost satisfaction from your Big Green
Ultra multi-purpose cleaner. You'll find assembly
instructions for all cleaning tasks, safety precautions,
pre-cleaning tips, and maintenance and troubleshooting
instructions. Please read this Guide thoroughly before
assembling your cleaner.
How to put it together - for large area deep cleaning
Aluminum wands. Position wands as shown.
1.
Press button down and align tapered end of wand
(each wand has one flared end with hole and one
tapered end with button.) While holding button down,
slide flared wand end over tapered wand end.
Continue sliding until button snaps into hole.
Floor Nozzle with Wand Solution Tube. Attach to
2.
wand end using same method described
in #1.
Wand Clips. Position two (2) wand clips on as
3.
shown, 1 per wand. Uncoil Wand Solution Tube from
Floor Nozzle and extend along wands. Do not kink
hose. Press tube into groove on each wand clip.
Flex Hose Assembly. Attach wand with assembled
4.
Floor Nozzle to Grip/Trigger Unit end of the Flex Hose
using the same button-in-hole method used in #1
and #2.
Wand Solution Tube Connection. Position Wand
5.
Solution Tube Connector (with lock slot) near Wand
Solution Tube Connection (with lock pin) as shown.
Slide Connector over Connection, engaging slot over
pin. While pressing inward, turn Connector clockwise
until lock pin snaps into slot.
IMPORTANT: Wand Solution Tube must lock firmly
over Connection to prevent leakage.
How to use this
Pay particular attention to the assembly diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they go. Following
the Guide will greatly enhance your ability to get
the most performance from your cleaner for
many years.
guidelean carpet
4