How To Use This Guide; How To Put It Together; Attach Handle To Vacuum; Attach Vacuum Hose And Tools - Bissell Lift-Off 3750 SERIES User Manual

How To Use This Guide

This User's Guide has been designed to help you get the
most satisfaction from your BISSELL Lift-Off. You'll find
assembly and operating instructions,
safety precautions, as well as maintenance and
troubleshooting instructions. Please read this Guide thor-
oughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they fit. Following
this User's Guide will greatly enhance your ability to
get the most performance from your BISSELL Lift-Off
for many years.

How To Put It Together

The only tool you'll need to assemble your vacuum
cleaner is a screwdriver.

Attach Handle To Vacuum

Locate the vacuum Handle and remove the screw
1.
packet taped to the base of the Handle.
Stand the vacuum upright and slide the base of
2.
the Handle firmly into the grooves at the top of the
vacuum body.
Check to be sure the Handle is fitted to the vacuum
3.
body. If there is a gap in front, continue to push firmly
until the Handle is flush.
Insert two of the screws from the screw packet into the
4.
existing hole. Tighten securely with a screwdriver.

Attach Vacuum Hose and Tools

Position the Hose Assembly on the back of the canis-
1.
ter as shown.
Attach the Hose to the vacuum.
2.
Standard Models - Use the remaining two screws from
the packet. Tighten securely with a screwdriver.
Twist 'n Snap ™ Hose Models - (Select Models)
Position the Twist 'n Snap Hose assembly on the vacuum
and line up the tabs on the base of the hose with the
corresponding notches. Turn the Twist 'n Snap Hose to
the right to lock into place.
WARNING:
Plastic film can be
dangerous. To avoid
danger of suffoca-
tion, keep away from
babies and children.
Standard Models
Twist 'n Snap Hose Models
5