Avaya CU360 Quick Start Manual page 3

CONNECTING THE CU360 TO THE TV
HDMI
USB C USB A
Setting Up the Device
1.
Place the CU360
above the TV, and use
its hinge to secure it.
2. Plug the HDMI cable
into the TV and CU360.
3. Plug in the power
adapter.
NOTE: if you are not using WiFi, make sure to
connect a LAN / Ethernet cable.
4
On / Off
Ethernet
Button
Power Supply
Video Privacy
Use the rubber cap
to cover the camera
for privacy
CONTROLLING THE CU360:
USING THE WEB
1.
When the CU360 is connected to the TV and
your Network, the IP address (X.X.X.X) will be
displayed in the top left corner of the screen.
2. Using a device connected to the same network,
type http://[IP ADDRESS] into the web browser.
3. Enter the default user name of Admin and the
password 1234.
4. A Configuration Wizard will be initiated (only if
the system has not yet been configured).
More details about system configuration can
be found in the CU360 User Guide, available at:
support.avaya.com
5