Configuration; Default Settings; Changing The Address; Table 6-1 Factory Settings - Siemens SENTRON PAC RS485 Manual

Configuration

6.1

Default settings

Factory default settings
Table 6-1
Parameter
Address
Baud rate
Response time
Communication protocol
Settings
Language
See also
Changing the address (Page 57)
6.2

Changing the address

NOTICE
Abnormal bus behavior with identical addresses
Several PAC RS485 expansion modules with the same address can cause abnormal
behavior of the entire serial RS 485 bus. The master can then not communicate with the
slave devices connected to the RS 485 bus. Assign a unique address to every expansion
module.
PAC RS485
Manual, 02/2008, A5E02091800B-01
Factory settings
Value
126
SENTRON PAC3200: 19200 baud
"0" = Auto
MODBUS RTU
8N2
The communication parameters are displayed in
the language set on the SENTRON PAC Power
Monitoring Device.
Default setting: English
6
57