Bus And Master - Siemens SENTRON PAC RS485 Manual

3.6

Bus and master

Restrictions
The following restrictions apply for the use of a bus and a master:
● You must use only broadcast commands that agree in syntax and meaning with the
● The following must be set on the bus and the master and on all nodes on the bus:
PAC RS485
Manual, 02/2008, A5E02091800B-01
broadcast commands supported by the Power Monitoring Device.
– The same baud rate
– The same communication settings, e.g. data bits, stop bits, parity bit
– The same protocol
Description
3.6 Bus and master
17