Firmware; Figure 3-2 Schematic View Of The Rear Of The Pac Rs485 Expansion Module - Siemens SENTRON PAC RS485 Manual

Description

3.5 Firmware

Figure 3-2
(1)
(2)
(3)
(4)
3.5 Firmware
General information
The PAC RS485 expansion module does not have its own firmware. The protocol of the
PAC RS485 expansion module is integrated into the firmware of the SENTRON PAC Power
Monitoring Device. New functions and changes to functions only become available after the
firmware of the SENTRON PAC Power Monitoring Device has been udpated.
NOTICE
The PAC RS485 expansion module will not work with the wrong firmware version
The SENTRON PAC3200 Power Monitoring Device must have at least firmware version
FWV2.0X. Earlier versions do not support the PAC RS485 expansion module. If necessary,
install the correct firmware version from V.1.0.1.0 with the program
SENTRON powerconfig
16
Schematic view of the rear of the PAC RS485 expansion module
Terminal block
Screw for mounting the PAC RS485 expansion module on the SENTRON PAC Power
Monitoring Device
Guide pins; their guide for correct position ensures that the PAC RS485 expansion module is
plugged into the SENTRON PAC Power Monitoring Device correctly
Pins
.
PAC RS485
Manual, 02/2008, A5E02091800B-01