Disassembly - Siemens SENTRON PAC RS485 Manual

4.6

Disassembly

Disassembling
1. Ensure safe isolation from supply.
2. Observe the ESD Guidelines. Discharge yourself. Handle the PAC RS485 expansion
3. Remove the terminal block from the expansion module, or detach the cable from the
4. Unscrew the PAC RS485 expansion module from the SENTRON PAC Power Monitoring
5. Remove the PAC RS485 expansion module from the SENTRON PAC Power Monitoring
6. If necessary, disassemble the SENTRON PAC Power Monitoring Device.
See also
Electrostatic sensitive devices (ESD) (Page 81)
PAC RS485
Manual, 02/2008, A5E02091800B-01
module by the plastic housing only.
terminal block.
Device.
Device.
More information
Disassembling the SENTRON PAC Power Monitoring Device
You can find information about how to disassemble the SENTRON PAC Power
Monitoring Device in the manual for the SENTRON PAC Power Monitoring Device.
Assembling
4.6 Disassembly
27