Next steps
1
Replace the battery.
2
Replace the
base
cover.
3
Replace the
microSD
4
Follow the procedure in
Touchpad button board
Removing the touchpad button board
Prerequisites
1
Follow the procedure in
2
Remove the
microSD
3
Remove the
base
cover.
4
Remove the battery.
5
Remove the speaker.
6
Remove the
LED
board.
NOTE:
Removal of system board and heatsink are not required to remove the touchpad button board.
Steps
1
Open the latch and disconnect the touchpad button board cable from the connector on the touchpad board.
62
Disassembly and reassembly
card.
after working inside your
before working inside your
card.
computer.
computer.