Touchpad buttons
Removing the touchpad button board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
2280 SATA
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
inner
frame.
About this task
The figure indicates the location of the touchpad button board and provides a visual representation of the removal procedure.
Steps
1. Locate the touchpad buttons board on your computer.
2. Open the latch and disconnect the touchpad button board cable from the connector on the system board.
3. Remove the two (M2x3) screws that secure the touchpad button board to the palmrest.
4. Lift the touchpad button board out of the computer.
44
Disassembly and reassembly
Before working inside your
SSD.
computer.