Touchpad Buttons; Removing The Touchpad Button Board - Dell J1FD8 Service Manual

Next steps
1. Replace the inner frame.
2. Replace the WLAN card.
3. Replace the battery.
4. Replace the base cover.
5. Replace the microSD
6. Follow the procedure in

Touchpad buttons

Removing the touchpad button board

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the base cover.
4. Remove the battery.
5. Remove the speaker.
Steps
1. Open the latch and disconnect the smartcard reader Flexible Flat Cable (FFC) from the USH board [1].
2. Peel the smartcard reader FFC of the palmrest [2].
56 Disassembly and reassembly
card.
after working inside your
before working inside your
card.
computer.
computer.