Sanyo SCP-7050 User Manual page 97

3. Highlight the Contacts entry you want to call, and press and
hold
P2T calling... and Connecting... followed by "You have floor." You
can now begin speaking.)
– or –
Highlight the Contacts entry you want to call and press and
release
described above, but "Floor is open." will appear on the screen
and either you or other party may press and hold
the floor and speak.)
Note:
During a Push 2 Talk call, the "floor" is the right to speak. When you
Floor is open.
see "
holding the key). Only the person who has the floor can speak. The phone
beeps if you press
4. Continue holding
speaking, release
(When the other party takes the floor, you will see the
speaker's name and phone number and the text "has floor.")
5. When you are finished, press
Note:
When neither party has the floor during a Push 2 Talk call, "
open.
" appears on the display. If no one takes the floor for 20 seconds,
the Push 2 Talk call ends automatically.
Tip:
If you press
standard voice call.
Making a Push 2 Talk Call (Group Call)
You can make a Push 2 Talk call to all members in a Group entry,
which you have in your Push 2 Talk List. You can communicate
with up to five members at a time.
1. Press
2. Press Go to (left softkey) > Personal Grps.
3. Highlight the group entry you want to call, and press and hold
to place the call and take the floor. (You will see
P2T calling... and Connecting... followed by "You have floor."
Continue with the Push 2 Talk call as described previously.)
to place the call and get the floor. (You will see
to place the call. (The call will connect as
," the first person to press
when the other party has the floor.
as you speak. When you finish
to allow the other party to speak.
or during step 3 above, you can make a
to access the Push 2 Talk List.
can speak (while
.
10. Push 2 Talk
to take
Floor is
91