Sanyo SCP-7050 User Manual page 106

Setting Ringer Types for Push 2 Talk Calls
1. Select
2. Select Push 2 Talk Calls, P2T Missed, or P2T Floor Tone.
3. Select your desired ringer type and press
Setting the Ringer Volume for Push 2 Talk Calls
1. Select
2. Select Separate Vol. and press the navigation key left or right to
select a volume level.
3. Press Done (left softkey) to save.
Setting a Vibrate Pattern for Push 2 Talk Calls
You can select your favourite vibrate pattern for Push 2 Talk
calls.
1. Select
2. Select Push 2 Talk Calls or P2T Missed.
3. Select a vibrate pattern and press
Setting an Alert Notification for Push 2 Talk Calls
1. Select
2. Select Push 2 Talk Calls, P2T Missed, or Headset Alert.
3. Select an option and press
To adjust the floor tone volume:
1. Select
2. Select Floor Tone Vol. > Earpiece or Speaker.
3. Press the navigation key left or right to select a volume level
and press Done (left softkey).
Tip:
You can also set alerts using the Alerts settings menu. (See "Alert
Notification" on page 36.)
100 10. Push 2 Talk
> Settings > Push 2 Talk > Sounds > Ringer Type.
> Settings > Push 2 Talk > Sounds > Ringer Volume.
> Settings > Push 2 Talk > Sounds > Vibrate Pattern.
> Settings > Push 2 Talk > Sounds > Alerts.
> Settings > Push 2 Talk > Sounds > Alerts.
.
.
.