Saving A Phone Number - Sanyo SCP-7050 User Manual

End-of-Call Options
To display the following options, press Options (right softkey)
within 10 seconds after disconnecting a call.
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Send Message to send a text message.
Save Phone# to save the phone number in your Contacts.
Go to Phone Book appears when the number is already in
your Contacts. (See "Saving a Phone Number" below.)
Note:
The End-of-Call options are not displayed for calls identified as
Private.
Tip:
You can also choose to send a message by pressing
softkey).

Saving a Phone Number

Your phone can store up to seven phone numbers in each of
500 Contact entries with up to 700 total numbers. Each entry's
name can contain 32 characters. Your phone automatically sorts
the Contacts alphabetically. (For more information, see "Using
Contacts" on page 59.)
1. Enter a phone number and press Options (right softkey) >
Save Phone#.
2. Select New Name or From Ph. Book.
New Name to create a new Contacts entry for the
number.
From Ph. Book to save the number to an existing entry.
(This step is not necessary on the very first entry in your
Contacts.)
3. Select a label and press
.
Send Msg
(left
2. The Basics 23