Pairing Bluetooth Devices; Using The Trusted Devices Options - Sanyo SCP-7050 User Manual

Pairing Bluetooth Devices

Paired Devices
The Bluetooth pairing process allows you to establish trusted
connection between your phone and another Bluetooth device.
When devices are paired, a passcode (PIN Code) is shared
between devices, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Select
phone will display a list of discovered in-range Bluetooth
devices.)
2. Select the device you wish to pair with and press
3. Select Add to Trusted.
4. Enter the passcode and press
other device accepts connection and enters the same code,
the pairing is complete.)
Waiting for Request
Waiting for Request helps to ensure the above pairing process
when it does not go smoothly.
To allow your phone to be paired with another Bluetooth device:
1. Select
2. Follow the onscreen prompts to enter your passcode and
press

Using the Trusted Devices Options

Once you have created paired devices, several options are
available from the trusted devices list.
To use the trusted devices options:
1. From the trusted devices list, highlight a device.
2. Press Options (right softkey) to display the following options:
110 12. Using Bluetooth
> Tools > Bluetooth > <Add New> > Search. (Your
> Tools > Bluetooth > <Add New> > Wait for Request.
.
Connect or Disconnect to connect to or disconnect from
the Bluetooth device (if applicable).
Send Item to send an item saved on your phone to another
Bluetooth device (if applicable).
. (When the owner of the
®
.