Selecting Vibrate Pattern; Selecting A Tone Length; Using Voice Prompt - Sanyo SCP-7050 User Manual

Selecting Vibrate Pattern

With this feature, you can select vibrate pattern for incoming
calls, messages, and schedule alarms.
1. Select > Settings > Sounds > Vibrate Pattern.
2. Select Incoming Calls, Push 2 Talk ,Voicemail, Messaging, or
Calendar/Alarm. The following items require an additional
step:
Incoming Calls: select With Caller ID or No Caller ID.
Push 2 Talk: select Push 2 Talk Calls or P2T Missed.
Messaging: select Text or Picture Msg.
3. Select a vibrate pattern and press

Selecting a Tone Length

1. Select > Settings > Sounds > Others > Tone Length.
2. Select Short or Long.
Setting a Start-up/Power-off Tone
1. Select > Settings > Sounds > Others.
2. Select Start-up Tone or Power-off Tone.
3. Select a tone, and press

Using Voice Prompt

This feature allows you to hear voice prompts Voice-activated
dialing, when using Voice Memo, Screen Call setting, etc.
(Default Setting is Off.)
1. Select > Settings > Sounds > Others > Voice Prompt.
2. Select On.
Tip:
When ringer volume is set to
prompts cannot be heard.
.
.
Silence All or Vibrate All
4. Your Phone's Settings
, voice
35