Sony PDW-HD1500 Operation Manual page 121

During thumbnail search, scene selection, and clip list operations
Alarm message in GUI
screen
Cannot Expand Clip any
Further.
Selected Essence Mark does
not Exist.
Sub Clip is Invalid.
Set Appropriate IN/OUT
Points.
Duration of One Clip List
must be Less than 24 Hours.
No More Sub Clips can be
Added to the Clip List.
Sub Clip does not Exist.
Clip List does not Exist.
Move is Invalid.
Chapter does not Exist.
Rec Start cannot be Deleted. The Rec Start essence mark cannot be deleted.
Rec Start cannot be Moved.
Clip is Locked.
All Clips are Locked.
All Clips are Unlocked.
Alarms relating to audio and video signals
Alarm message in time Alarm message in video monitor screen Action
data display area
a) INPUT VIDEO IS NOT DETECTED.
No INPUT!
CHECK THE VIDEO INPUT MODE AND
SUPPLY A VIDEO SIGNAL TO VIDEO
INPUT.
a) INPUT AUDIO EMPHASIS IS NOT
EMPHASIS!
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.
Description/action
The clip cannot be expanded into more blocks.
This appears when the EXPAND button is pressed when the number of block is maximum, or
when the duration of an expanded thumbnail is 1 frame.
The selected essence mark does not exist.
This appears in the essence mark selection screen when the specified essence mark does not
exist on the disc.
The temporal relationship between the specified In and Out points in sub clip trimming is not
correct.
Reset so that the value of the Out point timecode is larger than the value of the In point
timecode.
The total duration of the current clip list is greater than 24 hours.
This appears when the total duration of the current clip list exceeds the upper limit of 24 hours as
the result of adding or trimming sub clups.
The upper limit of sub clips in the current clip list has been reached.
This appears when the upper limit of 300 clips in a clip list has been reached as the result of
adding or trimming sub clips.
There are no sub clips in the current clip list.
This appears when an attempt is made to move, trim or delete sub clips or preset timecode.
There are no clip lists on the disc.
This appears when an attempt is made to execute a Delete Clip List operation when there are no
clip lists on the disc.
The sub clip cannot be moved.
This appear when an attempt is made to execute a Move Sub Clips operation when there are no
sub clip in the current clip list, or when there is only one sub clip.
The specified chapter has not been recorded.
This appears when an attempt is made to display a chapter when a chapter has not been
recorded for that clip.
This appears when an attempt is made to delete a Rec Start with a Delete Shot Mark operation.
Delete Shot Mark can delete only Shot Mark1 and Shot Mark2 marks.
Rec Start essence mark cannot be moved.This appears when an attempt is made to move a
Rec Start with a Move Shot Mark operation. Move Shot Mark can move only Shot Mark1 and
Shot Mark2 marks.
The clip is locked.
This appears when an attempt is made to delete a clip, set the clip thumbnail, or delete a shot
mark when the clip is locked.
All clips are locked.
This appears when an attempt is made to execute a Lock All Clips operation when all clips are
already locked.
All clips are unlocked.
This appears when an attempt is made to execute an Unlock All Clips operation when all clips
are already unlocked.
• Check the setting of V INPUT on Page P1 VIDEO of
the function menu (see page 40)
• Input an HDSDI signal.
Check the emphasis of the audio input signal.
.
121
Troubleshooting