Sony PDW-HD1500 Operation Manual page 101

Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name
653 UMID HD VANC LINE
657 ESSENCE MARK SDI OUTPUT
660 ESSENCE MARK SD VANC LINE
665 ESSENCE MARK HD VANC LINE
666 METADATA ITEM OUT
Settings
Specify the HD SDI signal VANC line into which the UMID should be
inserted.
9H to 17H to 20H
Note
The output VANC line during playback follows the setting for recording.
See "Using UMID Data" (page 127) for more information about UMID.
Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on: Output.
When menu item 657 is set to "on", select the line to which to output
essence marks.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (59.94i mode)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (50i
mode)
When item 657 is set to "on", select the line to which to output essence
marks.
9H to 17H to 20H
Note
The output VANC line during playback follows the setting for recording.
Specify whether to include the information from recorded VANC packets
in data items in the DATA ITEM section of MXF files.
off: Do not include VANC packet information in data items.
on: Include VANC packet information in data items.
101
Setup Menu