Sony PDW-HD1500 Operation Manual page 105

Item number Item name
827 AES/EBU AUDIO OUTPUT SELECT Select the audio signals to assign to AES/EBU audio output channels.
Sub-item
1 CH1/CH2
2 CH3/CH4
828 SDI AUDIO OUTPUT SELECT
Sub-item
1 CH1/CH2
2 CH3/CH4
834 AUDIO INPUT LEVEL
Sub-item
1 CH1
2 CH2
839 AUDIO AGC/LIMITER MODE
840 AUDIO AGC SELECT
841 AUDIO LIMITER SELECT
Menu items in the 800s, relating to audio control
Settings
tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.
tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4.
tr3/4: Tracks 3 and 4 assigned to audio output channels 3 and 4.
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4.
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4.
Select the audio signals to assign to SDI audio output channels.
tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.
tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4.
tr3/4: Tracks 3 and 4 assigned to audio output channels 3 and 4.
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4.
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4.
Select the analog audio input source.
line: Line input
mic: Microphone input
line: Line input
mic: Microphone input
For automatic input level adjustments performed on the analog audio
signals recorded on channels 1 and 2, select whether to perform the
adjustments in stereo mode or independently for channels 1 and 2.
mono: Perform automatic adjustments independently for channels 1 and
2.
stereo: Perform automatic adjustments in stereo mode.
Set the AGC saturation level.
off: AGC does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: AGC operates when the
VARIABLE switch is set to PRESET.
Note
This setting is valid only for channels where "mic" is selected with setup
menu item 834 AUDIO INPUT LEVEL. Regardless of this setting, AGC is
"off" for channels where "line" is selected.
Select the limiter saturation level, for limiting large input signals, for use
in manual adjustment of audio input levels.
off: The limiter does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: The limiter operates when the
VARIABLE switch is set to PRESET.
Note
This setting is valid only for channels where "mic" is selected with setup
menu item 834 AUDIO INPUT LEVEL. Regardless of this setting, the
limiter is "off" for channels where "line" is selected.
105
Setup Menu