Buffer Tank - York YLCA Series Technical Information

Mounting on 5, 7 and 9 units
FLEXIBLE
HOSE
Mounting on 12 and 15 units
FLEXIBLE
HOSE
1. Fasten the buffer tank to the unit (Detail A) by means of
the screws supplied with the accessory.
2. Hydraulically interconnect the buffer tank to the unit by
means of the flexible hose, the two other hoses and the
two Curalite gaskets supplied with the accessory. Cover
the hose with isolation.
58
WATER
INTAKE
WATER
DISCHARGE
WATER
INTAKE
WATER
DISCHARGE
DETAIL "A"
DETAIL "A"
Attention:
Before starting the system, purge the air from the
tank and the hydraulic circuit.
If an electric heater is installed, do not power the unit
until the circuit if full of water.
The heater includes a manual restart thermostat set to 95° C.