Installation Instructions - York YLCA Series Technical Information

Installation instructions

Inspection
Upon reception, inspect the goods and notify the carrier and
the insurance company, in writing, of any possible damage
during transportation.
Environmental protection
Packing
Packing is made of recyclable material. Its elimination should
be carried out in accordance with local regulations on selec-
tive collection of residual material.
Refrigerant
Contains greenhouse effect fluorided gas covered by
the Kyoto protocol.
For the type of gas and quantity per system, see the iden-
tification plate.
GWP (global warming potential): 2088.
Elimination of the unit
Upon disassembly of the unit, the components should be
recuperated ecologically. The cooling circuit is full of refrig-
erant that should be recuperated and returned to the gas
manufacturer for recycling.
Oil will remain in the hermetic compressor and, therefore,
must be returned with its circuit sealed.
The air conditioning unit will be deposited in an area deter-
mined by the local authorities, for its selective recuperation.
Safety
Installation and maintenance servicing of this air conditioning
system should be carried out by qualified and expert person-
nel. Maintenance servicing, such as cleaning coils and air
filters, should be carried out regularly to maintain optimum
performance of the units.
This unit should be installed and used in compliance with:
- Low voltage electro-technical regulations.
- Safety regulations for cooling plants and installations.
- Pressure device regulations.
- Basic building regulations.
- Local regulations.
Transportation
The units should always be transported in vertical position so
as to avoid oil leaking out of the compressor. If, for any reason,
this position need be changed sporadically, they will remain
in that position a strictly necessary period of time only.
CAUTION
Handling
The unit should be handled using the metal rails supplied for
fastening and transportation.
Warning signs
The following signs indicate the existence of potentially
dangerous conditions for users or servicing personnel.
Whenever found on the unit, take the meaning of each one
into account.
This symbol indicates an electrical danger
or risk.
Caution: The unit is equipped with remote
control system and can start automatically.
Before accessing the interior, disconnect
the power supply so as to avoid any con-
tact with the fan turbine in motion.
Caution: Fan in operation.
Caution: It is obligatory to read the instruc-
tions prior to any handling.
Caution: Do not touch hot surfaces.
Caution: Possible gas leak due to inad-
equate handling.
23